Filter
Top Products
80
6 F 8 A 0 9 3 4
You can check or change the output low limit as described below.
The following is an example to change the output low limit value from 4.0mA to 2.4mA.
Switch operation
Display example
Description
Select "LOW LIM" from the setting item
selection menu.
The currently set value (4.0mA in this
example) appears.
Then push .
*Pushing returns you to the setting
menu.
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push .
You can continue to change the setting item.
Push to change the selection
items.
: Selected item is scrolled up.
: Selected item is scrolled down.
When the desired item is selected, push
to set the item temporarily.
When you push , a message appears
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
8.2.18 Digital Output
Digital output functions can be selected.
You can select the digital output function from the tables shown below.
For details of digital output functions, see 10, “Functional Description.”