Thales Navigation CGRS Manual

A SERVICE OF

next previous

Surveying with ProMark2 83

Surveying with ProMark2

3.46). Note the Time on Site has been set to the default 300 seconds (5 minutes).

To enter additional point attribute information such as a site description, highlight the

field to be changed, and press the

ENTER button. Change the values to those

desired. Select

Save when you are finished to return to the Survey Menu.

Refer to the description of the

Point Attribute-Stop-and-go screen, page page 114,

for further details regarding this screen.

6. From the

Survey Menu, select Recording Interval (see also page 120). Set the

recording interval to 1 or 2 seconds, and be sure to match this interval in the Rover

receiver.

Figure 3.46 Point Attribute Screen