Filter
Top Products
52 SporTrak Color GPS Mapping Receiver
Reference
Tu rning the Beeper On/Off — Allows you to select which actions will
cause the beeper to sound. You can choose from Off, Keys Only
(pressing a key causes a beep), Alarms Only (when an alarm is activated)
or Keys & Alarms.
Default: Keys & Alarms
Selecting NMEA Message — Allows the selection of the NMEA message
that will be output from the SporTrak. Choices are Off, V1.5 APA,
V1.5 XTE or V2.1 GSA. Your choice will be dependent upon what
message the device you are connecting to needs to receive.
Default: Off
Selecting the Baud Rate — Enables you to set the baud rate of the data
being sent out from the SporTrak’s output port. The baud rate sent out
must match the baud rate that the receiving device is set for. You can
choose from 1200 baud, 4800 baud, 9600 baud, 19200 baud, 57600
baud or 115200 baud.
Default: 4800 Baud
From
Any
Screen
Highlight
Setup
Highlight
Beeper
Select
Beeper
Options
From
Any
Screen
Highlight
Setup
Highlight
NMEA
Select
NMEA
Message
From
Any
Screen
Highlight
Setup
Highlight
Baud Rate
Select
Baud
Rate