48 Promark2 User’s Guide
The
Point Attribute screen lets you enter attribute information for the survey point
you are about to observe. The attribute information comprises the following
parameters:
• A 4-character site ID. You must assign a unique site ID to each point surveyed in
your project. If you observe the same point more than once, assign this point the
same site ID for each data collection session.
• An optional 20-character narrative description of this point.
To enter point attribute information, highlight the field to be changed, and press the
ENTER button. Change the values to those desired. Select Save when you are
finished to return to the
Survey Menu.
Refer to the description of the
Point Attribute - Static screen, page 112, for further
details regarding this screen.
6. From the
Survey Menu, select Antenna. Set the antenna height parameters for this
point. Select
Slant if you are measuring the antenna height to the outside edge of the
GPS antenna, or
Vertical if you are measuring the antenna height to the bottom of the
GPS antenna mounting thread. Enter the measured antenna height value. Change the
units of measure by selecting
Units from the Survey Menu (page 110).
7. From the
Survey Menu, select File Manager. Delete old data files if more memory
is required to complete this observation session.
With
File Manager highlighted, press ENTER to bring up the File Manager screen,
Figure 3.19.
Figure 3.18 Point Attribute Screen
