Filter
Top Products
Introduction
OURGP11,0000004 –19–27OCT06–2/2
• PE4045TF151
• PE4045HF150
• PE4045HF252
• PE6068DF150
• PE6068TF150
• PE6068TF151
• PE6068TF250
• PE6068HF150
• PE6068HF250
DUBUQUE BUILT TIER 1 CERTIFIED ENGINES
• T04045DF150
• T04045DF151
• T04045DF152
• T04045DF153
• T04045TF150
• T04045TF151
• T04045TF152
• T04045TF250
• T04045TF251
• T04045HF120
• T04045HF150
• T06068DF150
• T06068TF150
• T06068TF151
• T06068TF250
• T06068HF150
• T06068HF250
NOTE: Before 2005, all Non-certified and Tier 1
Certified Saran built engines used the following
serial number sequences:
•
(CDxxxxD500000) - (CDxxxxD799999)
•
(CDxxxxT500000) - (CDxxxxT799999)
•
(CDxxxxH500000) - (CDxxxxH799999)
Since 2005, non-certified engines have the
seventh digit of the serial number as “B” while
Tier 1 certified engines have the seventh digit
as “C”.
READ THIS MANUAL carefully to learn how to operate
and service your engine correctly. Failure to do so
could result in personal injury or equipment damage.
THIS MANUAL SHOULD BE CONSIDERED a
permanent part of your engine and should remain with
the engine when you sell it.
MEASUREMENTS IN THIS MANUAL are given in both
metric and customary U.S. unit equivalents. Use only
correct replacement parts and fasteners. Metric and
inch fasteners may require a specific metric or inch
wrench.
RIGHT-HAND AND LEFT-HAND sides are determined
by standing at the drive or flywheel end (rear) of the
engine and facing toward the front of the engine.
WRITE ENGINE SERIAL NUMBERS and option codes
in the spaces indicated in the Record Keeping Section.
Accurately record all the numbers. Your dealer also
needs these numbers when you order parts. File the
identification numbers in a secure place off the engine.
SETTING FUEL DELIVERY beyond published factory
specifications or otherwise overpowering will result in
loss of warranty protection for this engine.
CERTAIN ENGINE ACCESSORIES such as radiator,
air cleaner, and instruments are optional equipment on
John Deere OEM Engines. These accessories may be
provided by the equipment manufacturer instead of
John Deere. This operator’s manual applies only to the
engine and those options available through the John
Deere distribution network.
NOTE: This operators manual covers only engines
provided to OEM (Outside Equipment
Manufacturers). For engines in Deere
machines, refer to the machine operators
manual.
110306
PN=3