Filter
Top Products
90
MAINTENANCE
Spark Plugs
Spark Plug Recommendations
CAUTION
Using non-recommended s park plugs c an result i n serious engine
damage. Always us e Polaris-recommended spark p lugs.
Refer to the specifications section beginning on page 112 for the
recommended spark plug type and gap for your vehicle.
Spark Plug Torque Specification
Plug Condition Torque
New Spark Plug 9-11 ft. lbs. (12-15 Nm)
Previously Installed Spark P lug 17-20 ft. lbs . (23-27 Nm)
Spark Plug Inspection
Spark plug condition is indicative of engine operation. The spark plug
firing end condition should be read after the engine has been warmed
up an d the vehicle has been driven at higher speeds. Immediately
check the spark plug fo r correct co lor. See page 91.
WARNING
A hot exhaust system and engine can cause s erious burns. Wear
protective gloves when removing a spark plug for inspection.
1. Remove the spark plug cap.
2. Using the special wrench provided in the tool pouch, rotate the
spark plug counterclockwise to remove it.
3. Reverse the procedure for spark plug installation, using the
recommended spark plug. Torque to specification.