Filter
Top Products
41
FEATURES
Instrument Cluster
Rider Information Center
Diagnostic Mode
The wrench icon will display when the gauge is in the diagnostic
mode. To exit the diagnostic mode, turn the ignition switch off and on.
Any movement of the tires will also cause the gauge to exit the
diagnostic mode.
To enter the diagnostics mode:
1. Turn the ignition switch off and wait 10 seconds.
2. Lock the parking brake.
3. Place the transmission in neutral.
4. Hold the mode/reverse override button and turn the ignition switch
on. Release the switch as soon as the display is activated.
5. Use the mode button to toggle through the diagnostic screens.