Filter
Top Products
9TRACKER950 CHARTPLOTTER Installation and Operation Manual
NAVMAN
2 Operation
2-1 Front panel
Keys
Esc key
The Esc key has three different uses:
1 To switch the unit on and off (see section 2-4).
2 When the main screens are displayed, press
the Esc key to move to the next main screen
(see section 2-6).
3 Otherwise the Esc key is an ‘escape’ key to
go from the current screen to the previous
one. If you were changing some data in the
current screen when you press this key, then
the changes are ignored.
Cursor keys
There are four cursor keys within the one round
button.
the top of the button is CursorUp
the bottom of the button is CursorDown
the left side of the button is CursorLeft
the right of the button is CursorRight
The function of a cursor key depends on what is
being displayed at the time.
Softkeys
The five keys in a row under the display are called
softkeys. The name of a softkey depends on the
information currently being displayed on the
screen. The name is displayed in a small box
directly above the key; if the name is grey or the
box is empty then the key is inactive.
Beeper
The TRACKER950 has an internal beeper. It
beeps:
once when you press a key
three times when you press an inactive key
continually when there is an alarm (see
section 2-3)
External beepers can be connected to sound
alarms in the boat (see section 10).
This section describes the basic principles of how to operate the TRACKER950. For more detail, refer to
the chapters following.
Power ON/OFF
or Esc (Escape)
C-MAP™
cartridge slot
Cursor Key
MOB Keys
Soft Keys