Filter
Top Products
User's manual NAVIGON 2100 | 2110
Managing Destinations - 31 -
No GPS reception
If the received GPS signal is insufficient, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
► Wait until GPS reception is sufficient for determining position, the
route will be recalculated and you can begin navigation.
► Tap the Cancel button. The MAIN WINDOW opens. Your destination
is saved in the L
AST DESTINATIONS list.
► Tap the Demo button. The route will be calculated using the centre
of the specified location as starting point. Subsequently, navigation
of the route will be simulated.
Tap
(Back) to end the demonstration.
6 Managing Destinations
Every destination that you enter, and the destinations from the LAST
DESTINATIONS list may be saved to the FAVOURITES list. This makes
sense if you frequently navigate to a particular destination.
6.1 Saving a destination
1. Enter a destination as described in "Specifying a new destination"
on page
23. Do not tap the Start Navigation button!
2. Tap on Options
> Save Destination.
- OR –
1. Select a destination from the L
AST DESTINATIONS list as described in
chapter "
Last Destinations" on page 28. Do not tap the Start
Navigation button!
2. Tap on Options
> Save as Favourite.
3. Enter a name for the destination.
4. If you want to define the destination as your home address, tap on
the
(Toggle) button so that the value Yes is highlighted in
black.
5. Tap the Save
button.
6.2 Defining a destination as home address
Only one destination from the FAVOURITES list can be defined as your
home address.