Filter
Top Products
6.5.2.2 Brightness
You can set the backlight level separately for both daylight and night modes, thus
enhancing the effect of the night colour scheme. The values are between 0 and 10,
where zero means there is no backlight at all, and 10 represents the maximum
backlight value.
6.5.3 User data management
Everything that was saved (pins, My POIs, Favourites, track logs etc.) or modified
(Settings, History lists) since Mio Map was installed is stored in a user database
located in the internal Flash Disk of Mio DigiWalker. Here you have options to save,
restore or reset the database, or parts of it.
6.5.3.1 Backup Data
You can make a safe copy of the whole user database on the SD card.
Tap this button to copy all user data and settings to the SD card. The backup is
always created with the same file name; so backing up data will always overwrite
previous backups.
Tip: If you wish to keep more versions of the user database, or you wish to save one
particular state (e.g. saved POIs and track logs of your holiday), look for the backup
file on the SD card, rename it, or save it to your PC.
Tip: If you move to another Mio DigiWalker device, and you wish to keep your data
and settings, make a backup, remove the SD card, insert it into the other device, then
return to this Settings page on the new device, and push the Restore Data button as
described in the next section. Mio Map will then restart, and all your previous POIs,
track logs, settings, city and find history lists will also appear on the new device.
6.5.3.2 Restore Data
If you have accidentally deleted things, or you have created a number of temporary
items and you do not wish to delete them one by one, you can tap this button to
restore the state of Mio Map to the latest backup.
89