Filter
Top Products
Panic alarm
68
1
Override switch
2
Indicator lamp
X
Activating: Press override switch 1.
Indicator lamp 2 comes on.
The functions in the rear are disabled.
It is still possible to operate the rear door
windows using the switches located on the
door control panel of the driver’s door.
X
Deactivating: Press override switch 1
again.
Indicator lamp 2 goes out.
The functions in the rear are enabled again.
For more information on power windows, see
the “Controls in detail” section
(Y page 334).
Panic alarm
1
 button
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any
interference received, including
interference that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
i
Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. this device must accept any
interference received, including
interference that may cause undesired
operation of the device.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
X
Activating: Press and hold button 1 for at
least 1 second.
An audible alarm and flashing exterior
lamps will operate briefly.
X
Deactivating: Press button 1 again.
or
X
Insert the SmartKey in the starter switch.
or
X
Press the KEYLESS-GO start/stop button.
The SmartKey with KEYLESS-GO must be
inside the vehicle.
Safety and security