Filter
Top Products
COMAND audio CD/audio DVD/MP3
202
!
Do not affix stickers or labels to the discs.
These could peel away and damage
COMAND. COMAND is designed to hold
discs which comply with the IEC 60908
standard. You can therefore only use discs
with a maximum thickness of 1.3 mm.
If you insert thicker discs, e. g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and can damage
COMAND.
Do not use CDs with a diameter of 8 cm.
Attempting to play discs with a diameter of
8 cm or playing such discs with an adapter
may cause damage COMAND.
Such damages are not covered by the
Mercedes-Benz Limited Warranty.
Only use round discs with a diameter of
12 cm.
Notes about handling CDs/DVDs
R
Only hold discs by the edge.
R
Handle discs carefully to prevent playback
problems.
R
Avoid getting scratches, fingerprints and
dust on discs.
R
Clean discs from time to time with a
commercially-available cleaning cloth. Do
not wipe them with a circular motion, but
only in straight lines from the center
outwards.
R
Only use a pen designed for such a purpose
to label discs.
R
Place discs back in their boxes after use.
R
Protect discs from heat and direct sunlight.
Inserting CDs and DVDs
G
Observe Safety notes, see
page 199.
i
If the CD/DVD has a printed side, this
must face upwards when the CD/DVD is
inserted. If neither side is printed, the side
to be played should face downwards.
Loading the CD/DVD changer
The CD/DVD changer can hold up to a total
of 6 audio CDs or DVDs.
1
Disc slot
2
Load button (all magazine trays)
3
Magazine tray buttons 1 – 6
i
Each magazine tray button 3 indicates
the status of the corresponding magazine
tray by means of an LED.
R
LED off = magazine tray is empty
R
LED constantly lit = magazine tray is
loaded
R
LED flashes = CD/DVD changer
requesting disc to be loaded
Loading an individual magazine tray
X
Press desired magazine tray button 3.
If a disc is loaded, it will be ejected.
X
Take disc out of slot 1.
Control systems