Mercedes-Benz 2009 S63 AMG Automobile User Manual


 
Occupant safety
59
The seat belt telltale < will only go out if
both the driver’s and the front passenger’s
seat belt (with the front passenger seat
occupied) are fastened, or the vehicle is
standing still and a front door is opened.
For more information, see “Practical
hints” (Y page 552).
Emergency Tensioning Device (ETD),
seat belt force limiter
The seat belts for the front seats and rear
outer seats are equipped with ETDs and seat
belt force limiters.
The ETDs are designed to activate in the
following cases:
R
in frontal or rear-end impacts exceeding
the system’s preset deployment threshold
R
in side impacts exceeding the system’s
preset deployment threshold on the far
side of the impact
R
in certain vehicle rollovers
R
if the restraint systems are operational and
functioning correctly, see = indicator
lamp (Y page 45)
The ETDs for the front seats will only activate
if the front seat belts are fastened (latch plate
properly inserted into buckle).
The ETDs for the rear outer seats will activate
with or without the respective seat belts
fastened.
In an impact, the ETDs remove slack from the
seat belts in such a way that the seat belts fit
more snugly against the body. Seat belt force
limiters, when activated, are employed to
help reduce the peak force exerted by the
seat belts on occupants during a crash.
i
The ETDs do not correct an incorrect seat
position or incorrectly worn seat belts.
The ETDs do not pull occupants back
toward the seat backrest.
G
Warning!
Pyrotechnic ETDs that were activated must
be replaced.
For your safety, when disposing of the
pyrotechnic ETDs always follow our safety
instructions. These are available at any
authorized Mercedes-Benz Center.
PRE-SAFE
®
has electrically operated
reversible pre-tensioners that do not
require replacement after activation.
Automatic comfort-fit feature seat belt
An automatic comfort-fit feature for the front
seats and for the rear outer seats (only for
vehicles with rear power seats) reduces the
retracting force of the seat belts when they
are in normal use.
Preventive occupant safety (PRE-
SAFE
®
)
G
Warning!
PRE-SAFE
®
is intended to reduce the
effects of an accident on vehicle occupants
who are wearing their seat belt properly.
Despite having the PRE-SAFE
®
system in
your vehicle, the possibility of injuries
occurring as a result of an accident cannot
be eliminated. Therefore, you should
always drive carefully and adjust your
driving to the prevailing road, weather, and
traffic conditions.
Your vehicle takes preventive measures to
better protect the occupants in the following
hazardous situations automatically.
PRE-SAFE
®
takes preventive measures in
R
emergency braking situations, e.g. if the
Brake Assist System (BAS) (Y page 70) is
activated
or when
Safety and security
Z