Filter
Top Products
Instrument cluster control system
251
Switching on or off rear view camera
automatically
i
The image from the rear view camera is
shown on the COMAND system display.
X
Press ( or & to select the
Assistance menu.
X
Press % or $ to select the Rearview
Camera function
X
Press #.
X
Press # again if you would like to
change the current status.
The following settings are available:
On When In Reverse: The rear view
camera automatically switches on when
reverse gear is engaged.
Disabled: The rear view camera is not
switched on.
Switching on or off Blind Spot Assist
X
Press ( or & to select the
Assistance menu.
X
Press % or $ to select the Blind
Spot Assist function
X
Press #.
X
Press # again if you would like to
change the current status.
Service menu
In the Service menu the following functions
are available:
R
Calling up messages (Y page 251)
R
Checking tire inflation pressure
electronically with the Advanced TPMS
(Y page 459)
R
Calling up the maintenance service
indicator display (Y page 482)
R
Checking engine oil level (S 600 and
S 65 AMG) (Y page 445)
Calling up vehicle malfunction, warning
and system status messages stored in
memory
Use the vehicle status message memory
function to scan malfunction and warning
messages that may be stored in the system.
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle’s system has
recorded.
The vehicle status message memory function
only appears if there are any messages
stored.
Control systems
Z