Filter
Top Products
Climate control system
400
or
X
Adjust air distribution (Y page 228).
or
X
Adjust air volume (Y page 228).
The indicator lamp in rocker switch U
goes out. Automatic control of air volume
and air distribution is switched off.
You can adjust the air distribution
(Y page 228) or air volume (Y page 228)
manually.
i
To return to the standard display, activate
the Front Climate Control function via
COMAND (Y page 232).
Operating on the rear climate control
panel
X
Set the desired temperature
(Y page 400).
X
Activating: Press rocker switch 4
(Y page 397) repeatedly until AUTO mode is
selected in the display.
X
Deactivating: Press rocker switch 4
repeatedly until MAN mode or OFF mode is
selected in the display.
Setting temperature
You can adjust the air temperature for each
of the 5 zones separately. You should raise or
lower the temperature setting in small
increments, preferably starting at 72‡
(22†).
Front temperature with front climate
control panel
X
Increasing/decreasing: Press rocker
switches ® 2 and/or a up or down or
use COMAND (Y page 227).
The climate control system will
correspondingly adjust the interior air
temperature.
Rear temperature with front climate
control panel
X
Activate the Rear) function via
COMAND (Y page 231). This function is
used to operate the rear climate control via
COMAND and the rocker switches on the
control panel from the front.
X
Increasing/decreasing: Press rocker
switches ® 2 and/or a
(Y page 395) up or down.
Rear temperature with rear climate
control panel
X
Increasing/decreasing: Press rocker
switches ® 1 and/or 6
(Y page 397) up or down.
Controls in detail