Filter
Top Products
Instrument cluster control system
237
Instrument cluster control system
Introduction
The control system is activated as soon as the
starter switch is in position 2 (Y page 307).
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to call up statistical
data on your vehicle, and much more.
G
Warning!
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the
multifunction steering wheel should only be
done by the driver when traffic and road
conditions permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
The control system relays information to the
multifunction display.
Multifunction steering wheel
The displays in the multifunction display and
the settings in the control system are
controlled by the buttons on the multifunction
steering wheel.
1 Multifunction display
2 Press button
s to take a call
to dial
5
to redial
5
t to end a call
to reject an incoming call
F to mute
Press button
æ
ç
to set the volume
to operate the RACETIMER
6
3 Press button
!
to activate the Voice Control
System
4 Press button briefly
L
to cancel the Voice Control
System, back, confirm
messages
Press and hold button
L
to select the standard display
5
Function only available in telephone menu.
Control systems
Z