Filter
Top Products
Voice Control introduction
257
Item
1
!
Activating the Voice Control
System
Accepting a call
2
L
Canceling Voice Control
3
æ
Increasing volume
ç
Decreasing volume
s Taking a call
Dialing
Redialing
t Ending a call
Rejecting an incoming call
i
The Voice Control System can be
canceled at any time, even during a dialog.
Please note that if the Voice Control
System is canceled during a dialog, then
the complete procedure is stopped and the
Voice Control System is canceled.
Activating the Voice Control System
X
Switch on COMAND (Y page 83).
X
Press !.
An acoustic signal confirms the activation
of the system.
X
Speak a command.
Canceling the Voice Control System
X
Press L.
or
X
Speak the command “Cancel”
(except for speaking voice entries, entering
a city or carrying out individualization).
or
X
Press any COMAND button.
Setting volume level
X
Activate the Voice Control System.
X
Speak a command, for example “Help”.
X
Press æ or ç. The volume is
increased or decreased during voice
output.
or
X
Set volume for voice output using the
COMAND volume thumbwheel on the lower
part of the front center console
(Y page 92).
Displays
COMAND Display
In addition to the acoustic help function, a
visual help function (Y page 97) is available
on the COMAND display.
Upon activating the Voice Control System,
the most important available commands for
the currently active system appear on the
COMAND display.
When the Voice Control System requires
additional information from the user, a
selection list is shown on the COMAND
display in the address book and navigation
system.
Control systems
Z