Filter
Top Products
COMAND vehicle menu
220
COMAND vehicle menu
Introduction
In this menu, you can program the following
vehicle functions:
Function
Exterior Lighting Delayed Switch-off
(Y page 220)
Locator Lighting (Y page 221)
Exterior Mirror Convenience Settings
(Y page 222)
Automatic Locking (Y page 222)
Easy Entry/Exit Feature (Y page 223)
Interior Ambient Light (Y page 224)
Interior Lighting Delayed Switch-off
(Y page 224)
Rear-window Sunshade (Y page 225)
Trunk Opening-height Restriction
(Y page 226)
Setting night security illumination
(Exterior Lighting Delayed Switch-off)
i
The components and operating principles
of COMAND can be found on (Y page 82).
Use this function to set whether and how long
you would like the exterior lighting to
illuminate during darkness after exiting the
vehicle and all doors closed.
The exterior lighting automatically goes out
after the delayed switch-off time has expired.
You can select:
R
0 sec., the delayed switch-off feature is
deactivated
R
15 sec., 30 sec., 45 sec., or 60 sec.,
the delayed switch-off feature is activated
i
You can reactivate this function within
10 minutes by opening a door.
X
Select Vehicle.
The main area is active.
X
Selecting Exterior Lighting Delayed
Switch-off menu: Slide omp or rotate
ymz.
X
Confirming selection: Press n.
X
Selecting length of time: Slide qmr or
rotate ymz.
X
Confirming selection: Press n.
or
X
Select Vehicle £ Vehicle £
Exterior Lighting Delayed Switch-
off.
A selection list appears.
The current setting is indicated by a
dot R.
Control systems