Filter
Top Products
Vehicle status messages in the multifunction display
330
1
Retaining screw
2
Spare wheel
3
Storage well casing
X
Remove retaining screw 1 by turning it
counterclockwise.
i
If retaining screw 1 does not come
loose, turn storage well casing 3 slightly
counterclockwise. Retaining screw 1
should then come loose easily.
X
Remove storage well casing 3.
X
Remove spare wheel 2.
For information on mounting the spare wheel,
see “Flat tire” (Y page 397).
Storing the spare wheel after use
X
Place the spare wheel into the spare wheel
well (Y page 330).
X
Place the storage well casing into the spare
wheel (Y page 330).
X
Secure the spare wheel by turning the
retaining screw (Y page 330) clockwise.
X
Place the jack into the storage well casing
(Y page 328).
X
Close and pull tight the hook and loop
fastener (Y page 328) that secures the
jack.
Vehicle status messages in the
multifunction display
Notes
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
Selecting the Vehicle status message
memory menu in the control system
(Y page 156) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot be
cleared from the multifunction display using
the reset button (Y page 147) or button
j, k, · or è on the
multifunction steering wheel.
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
the reset button (Y page 147) or button
j, k, · or è on the
Practical hints