Filter
Top Products
Memory function
113
Folding in and out manually
The exterior rear view mirrors can vibrate if
they are not folded out completely.
1
Button for folding exterior rear view
mirrors in and out
X
Switch on the ignition.
X
Folding in: Briefly press button 1.
Both exterior rear view mirrors fold in.
i
If you are driving at more than
approximately 30 mph (47 km/h), you will
not be able to fold the exterior mirrors in.
X
Folding out: Briefly press button 1.
Both exterior rear view mirrors fold out.
!
If an exterior rear view mirror housing is
forcibly pushed forward (hit from the rear)
or forcibly pushed rearward (hit from the
front), press button 1 to fold mirrors in,
then press button 1 again to fold mirrors
out. Do not force mirrors by hand as this
may damage the adjustment mechanism.
The mirror housing is then properly
positioned and you can adjust the mirror in
the usual manner.
Please make sure both rear view mirrors
are folded out before driving off.
Memory function
Notes
With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver’s
side can store all of the following settings:
R
Seat position
R
Multicontour seat: previously saved setting
R
Steering wheel position
R
Exterior rear view mirrors’ position
G
Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each memory position button on the front
passenger side can store all of the following
settings:
R
Seat position
R
Multicontour seat: previously saved setting
Controls in detail
Z