Filter
Top Products
Loading and storing
240
Before installing cargo compartment cover
blind behind the second-row seats, fold the
third-row seats forward (Y page 235).
Blind installed behind second-row seats
1
Release button
2
Blind
X
Removing: Pull blind 2 to the left until it
engages.
X
Installing: Remove the mount covers in the
side trims of the third seat row when
installing roller blind 2 behind the second-
row seats.
Mount cover behind second-row seats
3
Cover
X
Press on cover 3 at its upper edge as
indicated by arrow.
The cover’s lower edge flips up.
X
Remove cover 3 by pulling its lower edge
out of the side trim.
i
To avoid loss of the covers, insert the
covers into the mounts currently not in use.
X
Make sure release button 1 faces up and
the roller blind handle (Y page 239) is to
the rear before inserting the roller blind.
X
Place left side of blind 2 in left mount.
X
Position right side of blind 2 over right
mount.
X
Press release button 1 and guide blind
2 into mount.
X
Make sure the cargo compartment cover
blind is securely fastened.
Cargo net
G
Warning!
Make sure the cargo net is properly
engaged at top and bottom position and the
tightening belts are securely fastened.
Never use a damaged cargo net.
To help avoid personal injury from smaller
objects being thrown around in the
occupant compartment during a collision or
sudden maneuver, always use cargo net
when transporting cargo.
The cargo net cannot prevent the
movement of large, heavier objects into the
passenger compartment in an accident.
Such items must be properly secured using
the cargo tie-down rings in the cargo
compartment floor.
Passenger use of seats behind installed
cargo net is restricted because of the
footwell being taken up by the net.
Controls in detail