Filter
Top Products
Control system
165
X
Press button æ or ç to switch the
distance warning function On or Off.
1
Symbol for activated distance warning
function
If the distance warning function is activated
you will see the symbol : in the Standard
display. When the distance warning function
is deactivated the symbol : will not
appear.
DSR (Downhill Speed Regulation)
programmed default speed
Use this function to program the default
speed the DSR is set to when it is activated.
You can program the default speed between
4 - 10 mph (Canada: 6 - 18 km/h). The set
value is increased in 1 mph (Canada:
2 km/h) increments.
X
Press button è or · repeatedly until
the Vehicle configuration menu appears
in the multifunction display.
X
Press button j or k repeatedly until
the message DSR Speed appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç repeatedly until
the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use the
programmed default speed to regulate the
vehicle’s speed.
Once DSR is switched on, you can adjust the
set speed using the cruise control lever
(Y page 183).
Trip computer menu
Use the Trip computer menu to call up
statistical data on your vehicle.
The following information is available:
R
Fuel consumption statistics since start
(Y page 165)
R
Fuel consumption statistics since last reset
(Y page 166)
R
Resetting fuel consumption statistics
(Y page 166)
R
Distance to empty (Y page 166)
When you enter the Trip computer menu,
you will always see the fuel consumption
statistics since start first.
Fuel consumption statistics since start
X
Press button ÿ or è repeatedly until
the message From Start appears in the
multifunction display.
Controls in detail
Z