Filter
Top Products
Driving systems
176
1
Setting current or higher speed
2
Setting current or lower speed
3
Deactivating the Distronic
4
Activating the Distronic or resuming to
the last set speed
Activating Distronic
You can activate the Distronic when the
vehicle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
When the Distronic is activated, one or two
cruise control speed segments around the set
speed in the speedometer dial are
illuminated. The multifunction display will
show a message such as
DISTRONIC 55 MPH
(Canada: DISTRONIC 90 km/h).
After approximately 5 seconds the currently
set speed appears in the status indicator of
the multifunction display:
R
USA only: e.g. DTR 55 Miles
R
Canada only: e.g. DTR 90 km/h
If the Distronic is not activated after the
cruise control lever is pulled in direction of
arrow 4 (Y page 175), you will see the
message DISTRONIC Off in the
multifunction display.
In the following cases you cannot activate the
Distronic:
R
up to 2 minutes after starting the engine
R
when you brake
R
when you have engaged the parking brake
R
when the automatic transmission is in park
position P, reverse gear R, or neutral
position N
R
when the ESP
®
is switched off or has
switched off due to a malfunction
The vehicle speed displayed on the
speedometer can briefly vary from the speed
setting on the Distronic system.
Setting the current speed
X
Accelerate or decelerate to the desired
speed.
X
Briefly lift the cruise control lever in
direction of arrow 1 or depress in
direction of arrow 2 (Y page 176).
X
Remove your foot from the accelerator
pedal.
i
If you do not take your foot off of the
accelerator pedal and continue to
accelerate past the set speed, the following
message will appear in the multifunction
display:
DISTRONIC Override
The distance to a slower moving vehicle in
front of you will not be set. Your vehicle
speed will then be determined only by the
accelerator pedal position.
Setting a higher speed
G
Warning!
Keep in mind that it may take a brief
moment until the vehicle has made the
necessary adjustments.
Controls in detail