Filter
Top Products
Control system
160
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
R
Setting the time (Y page 160)
R
Setting the date (Y page 160)
If your vehicle is equipped with the COMAND
system and navigation module, see separate
COMAND system operating instructions for
information on how to set the time and date.
Setting the time
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
X
Move the selection marker with button
æ or ç to the Time/Date submenu.
X
Press button j or k repeatedly until
the message Clock Set Hour or Clock
Set Minute(s) appears in the
multifunction display.
The selection marker is on the current
setting.
Example illustration for setting the hour
X
Press button æ or ç to set the hours
or minute(s).
Setting the date
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
X
Move the selection marker with button
æ or ç to the Time/Date submenu.
X
Press button j or k repeatedly until
the message Date Set Month, Date Set
Day, or Date Set Year appears in the
multifunction display.
The selection marker is on the current
setting.
Example illustration for setting the month
X
Press button æ or ç to set the
month, day, or year.
Lighting submenu
Access the Lighting submenu via the
Settings menu. Use the Lighting submenu
to change the lamp and lighting settings on
your vehicle.
The following functions are available:
R
Setting daytime running lamp mode (USA
only) (Y page 161)
R
Setting locator lighting (Y page 161)
R
Setting night security illumination
(Y page 162)
R
Setting interior lighting delayed shut-off
(Y page 162)
Controls in detail