Filter
Top Products
470
Practical hints
Towing the vehicle
Installing towing eye bolt
Front of vehicle
1 Cover on right side of front bumper
To remove cover:
̈ Press mark on cover 1 in direction of
arrow.
̈ Lift cover 1 off to reveal the threaded
hole for towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the cargo compartment floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover 1 and snap into place.
Rear of vehicle
2 Cover on right side of rear bumper
To remove cover:
̈ Pull cover 2 in direction of arrow.
̈ Fold cover 2 down to reveal the
threaded hole for the towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the cargo compartment floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover 2 and snap into place.