Filter
Top Products
449
Practical hints
Replacing wiper blades
Vehicles with KEYLESS-GO*
̈ Turn off the engine (୴ page 64).
With the driver’s door closed, the start-
er switch is now in position 1.
̈ Turn combination switch to wiper
setting II (
୴ page 57).
̈ With wiper arms in the vertical position,
open the driver’s door.
The starter switch is set to position 0,
same as SmartKey removed from start-
er switch.
̈ Turn combination switch to wiper
setting 0 (
୴ page 57).
Removing front wiper blades
̈ Fold the wiper arm forward until it
snaps into place.
̈ Turn the wiper blade at a right angle to
wiper arm.
̈ Slide the wiper blade sideways out of
the retainer.
Installing front wiper blades
̈ Slide the wiper blade onto wiper arm
until it locks in place.
̈ Rotate the wiper blade into position
parallel to the wiper arm.
̈ Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
Removing rear wiper blade
!
Do not pull on the wiper blade inserts. They
could tear.
!
Hold on to the wiper when folding the wiper
arm back. If released, the force of the impact
from the tensioning spring could crack the rear
window.
Do not allow the wiper arms to contact the rear
window glass without a wiper blade inserted.
For your convenience, we recommend that you
have this work carried out by an authorized
Mercedes-Benz Center.
Make sure the wiper blades are properly in-
stalled. Improperly installed wiper blades may
cause rear window damage.
୴୴