Filter
Top Products
170
Controls in detail
Control system
The following settings and submenus are
available in the
Settings
menu:
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 152) for approxi-
mately 3 seconds.
In the multifunction display you will see
the request to press the reset button
again to confirm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
Submenus in the Settings menu
̈ Press button j.
In the multifunction display you see the
collection of the submenus.
̈ Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with button ç, scroll up
with button æ.
With the selection marker on the desired
submenu, use the button j to access
the individual functions within that sub-
menu. Once within the submenu, you can
use the button j to move to the next
function or the button k to move to the
previous function within that submenu.
The settings themselves are made with
button æ or ç.
Function Page
Resetting all settings 170
Submenus in the Settings menu 170
Instrument cluster submenu 172
Time/date submenu 174
Lighting submenu 176
Vehicle submenu 180
Convenience submenu 181
i
The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5seconds, the
Settings
menu reappears in the
multifunction display.
For safety reasons, the
Headlamp mode
func-
tion in the
Lighting
submenu is not reset while
driving.