Filter
Top Products
184
Controls in detail
Control system
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until you see the reading that you want
to reset in the multifunction display.
̈ Press and hold the reset button in the
instrument cluster (
୴ page 152) until
the value is reset to
0
.
Distance to empty
̈ Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
̈ Press button j or k repeatedly
until the message
Range:
appears in
the multifunction display.
The calculated remaining driving range
based on the current fuel tank level ap-
pears in the multifunction display.
TEL* menu
i
If only very little fuel is left in the tank, a ve-
hicle at the fuel pump is shown instead of the
range.
Warning! G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road and traffic condi-
tions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)