Filter
Top Products
174
Controls in detail
Control system
Time/Date submenu
Access the
Time/Date
submenu via the
Settings
menu. Use the
Time/Date
sub-
menu to change the time and date display
settings. The following functions are avail-
able:
Synchronizing the time
This function can only be seen on vehicles
with COMAND and navigation module*.
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Time, synchroniz.
with Head Unit
appears in the multi-
function display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the desired setting.
Setting the time (hours)
This function can only be seen when time
synchronization is switched off.
̈ Move the selection marker with
button æ or ç to the
Time/Date
submenu.
̈ Press button j or k repeatedly
until the message
Time, hours Press
R to confirm
appears in the multifunc-
tion display.
The selection marker is on the hour set-
ting.
̈ Press button æ or ç to set the
hours.
̈ Confirm by pressing reset button
(
୴ page 152).
Function Page
Synchronizing the time 174
Setting the time (hours) 174
Setting the time (minutes) 175
Setting the date (month) 175
Setting the date (day) 175
Setting the date (year) 176
i
Information on setting the time, refer to sep-
arate COMAND instructions.