Filter
Top Products
46
Getting started
Adjusting
Easy-entry/exit feature
This feature allows for easier entry into and
exit from the vehicle. When entering and
exiting the vehicle, the steering wheel is in
its uppermost position.
The easy-entry/exit feature can be activat-
ed or deactivated in the
Convenience
sub-
menu of the control system (
୴ page 181).
With the easy-entry/exit feature activated,
the steering wheel will return to its last set
position when you:
ț close the driver’s door with the ignition
switched on
or
ț insert the SmartKey into the starter
switch or press the KEYLESS-GO*
start/stop button (
୴ page 39) once
with the driver’s door closed
With the easy-entry/exit feature activated,
the steering wheel tilts upwards when you:
ț remove the SmartKey from the starter
switch
or
ț open the driver’s door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button (
୴ page 39) in position 1
Warning! G
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, do one of
the following:
ț Move steering wheel adjustment stalk.
ț Press one of the memory position
buttons (୴ page 139).
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
The last set steering wheel position is stored
when
ț the ignition is switched off (୴ page 63)
ț the position is stored in memory
(
୴ page 139)
i
If the current position for the steering wheel
is in the uppermost tilt position, the steering
wheel will no longer be able to move upward
when the easy-entry/exit feature is activated.
The adjustment procedure is briefly interrupted
when the engine is started.