Filter
Top Products
186
Controls in detail
Control system
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until you see the
Tel
menu in the mul-
tifunction display.
̈ Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. In the
multifunction display you will see the
message
Please wait
.
When the message
Please wait
disap-
pears, the phone book has been load-
ed.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in as-
cending or descending alphabetical or-
der.
̈ Press button s.
The system dials the selected phone
number.
ț If the connection is successful, the
name of the party you are calling
and the duration of the call will ap-
pear in the multifunction display.
ț If no connection is made, the con-
trol system stores the dialed num-
ber in the redial memory.
Redialing
The control system stores the most recent-
ly dialed phone numbers. This eliminates
the need to search through your entire
phone book.
̈ Press button ÿ or è repeatedly
until you see the
Tel
menu in the mul-
tifunction display.
̈ Press button s.
In the multifunction display you see the
first number in the redial memory.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
̈ Press button s.
The control system dials the selected
phone number.
i
If you press and hold button j or k
for longer than 1 second, the system scrolls rap-
idly through the list of names until you release
the button again.
Cancel the quick search mode by pressing
button t.