Filter
Top Products
169
Controls in detail
Control system
Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
̈ Press button k or j.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see “Vehicle status messag-
es in the multifunction display”
(
୴ page 394).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
Settings
menu there are two func-
tions:
ț The function
To reset: Press reset
button for 3 seconds
, with which you
can reset all the settings to the original
factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
Settings
menu is seen in the
multifunction display.
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2. You will then only
see high-priority messages in the multifunction
display (
୴ page 394).