Filter
Top Products
276
Controls in detail
Loading
Cargo compartment cover
The cargo compartment cover unlocks
automatically while the tailgate is open-
ing/closing and is automatically raised/
lowered.
It is therefore unnecessary to roll up the
cargo compartment cover before loading
and unloading.
1 Handle
2 Cargo compartment cover
Rolling up the cargo compartment cover
̈ Use handle 1 to pull cargo compart-
ment cover 2 down into the horizontal
position.
̈ Unhook cargo compartment cover
from its anchorages on the left and
right sides.
To do so, pull cargo compartment
cover 2 slightly towards the rear and
lower it.
̈ Slowly guide cargo compartment
cover 2 back until it stops.
Pulling out the cargo compartment cov-
er
̈ Pull out cargo compartment cover 2
towards the rear until it engages.
Removing the twin roller blind
̈ Roll up cargo net and cargo compart-
ment cover.
̈ Fold both rear seat cushions forward
(
୴ page 266).
̈ First swing the right-hand and then the
left-hand backrest of the rear seat for-
ward (
୴ page 266).
̈ Push twin roller blind to the left out of
its anchorage on the rear seat backrest
and remove it.
!
When loading the vehicle, make sure not to
load the cargo compartment over the lower edge
of the side windows.
The twin roller blind could otherwise be damaged
when the tailgate is being closed.