Filter
Top Products
43
Getting started
Adjusting
Seat adjustment
The seat adjustment switches are located
on the front doors.
1 Seat fore and aft adjustment
2 Backrest tilt
3 Seat height
4 Seat cushion tilt
5 Head restraint height
̈ Switch on the ignition (୴ page 37).
or
̈ Open the respective door.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in direction of arrow 1.
Seat cushion tilt
̈ Press the switch up or down in direc-
tion of arrow 4 until your upper legs
are lightly supported.
Backrest tilt
̈ Press the switch forward or backward
in direction of arrow 2.
Seat height
̈ Press the switch up or down in direc-
tion of arrow 3.
Head restraint height
̈ Press the switch up or down in direc-
tion of arrow 5.
i
The memory function (୴ page 138) lets you
store the settings for the seat position together
with the settings for the steering wheel and the
exterior rear view mirrors.
!
When moving the seat, make sure there are
no items in the footwell or behind the seats. Oth-
erwise you could damage the seats.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.