Filter
Top Products
68
Saving and Replaying a Sonar Record
To save a sonar chart:
1.Press the MENU key.
2.Select “Sonar Chart Logging”.
The screen at right appears.
3.To save the chart as “Chart
1”, select “Start Logging” and
press the ENT key. If you
want to use a different file
name, select “File Name” and
name a new file. The Sonar
Chart Logging menu is
erased.
4.The unit records the current
sonar data to the MMC.
5.To stop recording, select “Sonar Chart Logging” as shown above.
Select “Stop Logging” from the menu. The menu is erased and the
unit stops logging the chart data.
To replay a sonar chart:
1.Press the MENU key twice.
2.Select “Sonar Setup”.
3.Select “Sonar Simulator”.
4.Select “Chart Used” and
choose the file name that you
used when the chart was
saved. In this example, it’s
“Chart 1.slg”.
5.Select “Sonar Simulator On”.
The unit will switch to the
simulator mode, reading the
chart data from the file that you saved on the MMC.