Filter
Top Products
4
ANTENNA
Your GlobalMap 12 has a removable antenna that folds over the display
when the unit is not in use. This prevents damage to the display. To open
the antenna, simply lift on an edge and raise it to the desired position. The
antenna is a quick release design, simplifying its removal and installation.
To remove the antenna, push the antenna to the right (1), while simulta-
neously moving the antenna up (2), until it clears the AirMap's right side
(3). To replace the antenna, reverse the above steps. Make certain to
align the antenna with the GlobalMap 12 until the antenna slides into
place to the left by itself. When it does, the antenna has mated with the
connector inside the unit and it’s ready for use.
1. 2. 3.
IMPORTANT!
There are arrows molded into the bottom of the battery cover and battery
holder. Make certain the arrows are properly aligned! Otherwise, the bat-
tery holder won’t slide all the way into the cover and the battery pack
won’t slide onto the unit.
Slide the battery pack onto the unit and the GlobalMap 12 is ready for
use.