Filter
Top Products
29
other words, if you set the alarm to go off at 7:00 a.m., then the GlobalMap
12 will have to be on at 7:00 a.m., also.
TIMERS
The GlobalMap 12 has two timers built in. One
is a countdown timer and the other is a count-
up timer. The countdown timer counts down
from the time you put in to zero. The count-up
timer starts at zero and counts up to the time
you entered.
To set either timer, first switch to a screen that
is showing the timer that you want to use. Next,
press the MENU key, then highlight the desired
timer set menu. In this example, we’re setting
the countdown timer. Now press the right ar-
row key. A screen similar to the one below ap-
pears.
Using the right and left arrow keys, move the
black box to the first number in the time that
you want to set. (The time is in hours, minutes,
and seconds) Now press the up or down ar-
row keys until the desired number shows. Con-
tinue until the time shown in the display is cor-
rect, then press the ENT key. In this example,
the down timer is set for 10 minutes. The unit
returns to the navigation, mapping, or windows
display.
To start the timer, press the MENU key, then
move the black box to the “Dn Timer STOP/
GO” label. Press the right arrow key to start
the timer. The timer continues counting until
you stop it. If you turn the up timer’s alarm on
(press the right arrow key when the black box
is on the (Up ALM...Off/On label), it will sound a tone when it reaches the
time you entered in the up timer set menu. Press the EXIT key to silence
the alarm.
You can reset either alarm to the time you originally set by pressing the
MENU key, then moving the black box to either the “Up Timer Reset” or
“DN Timer Reset” label, then press the right arrow key.