Filter
Top Products
33
the “Options” label and press the right arrow key. Finally, highlight the
“Delete WPT” label and press the right arrow key. A message appears,
asking if you really want to delete this waypoint. Press the right arrow key
to delete it, the left to exit without deleting the waypoint.
Delete All Waypoints
You can remove all of the waypoints from the unit’s memory. To do this,
press the MENU key, then highlight the System Setup menu and press
the right arrow key. Now highlight the DEL ALL WPTS label. The unit re-
moves all waypoints from memory. Note: This also removes all routes
from memory.
ROUTES
You can connect several user waypoints together to form a route. When
you recall the route, the unit shows navigation information to the first way-
point in the route, then when you reach that waypoint, it switches to the
next waypoint, and so on until you reach the last waypoint in the route.
Create a Route
To create a route, first press the MENU key, highlight
the “PLAN/EDIT ROUTES” label, and press the right
arrow key. The screen shown at right appears.
This unit can store up to 99 routes. Route number one
shows on this page. If you wish to create a route using
a different number, simply press the left or right arrow
keys until the desired route number appears. In this
example, however, we’ll use route number one.
At the bottom of this menu is the “Edit Name” label. If you wish to name
the route, highlight that label, then press the right arrow key. Use the ar-
row keys to name the route, (you can use up to eight characters in the
name) then press the ENT key when you’re finished.
To add waypoints to the route, highlight the “Edit Route”
label and press the right arrow key. The screen shown
at right appears. This is the waypoint list screen. This
shows all of the waypoints that form the route. The first
waypoint is highlighted at the top of the screen. To se-
lect the first waypoint in the route, simply press the
right arrow key. A new menu appears as shown at the
top of the next page.