Lowrance electronic 212 GPS Receiver User Manual


 
21
Using the right and left arrow keys, highlight the first
number in the time that you want to set. (The time is in
hours, minutes, and seconds) Now press the up or down
arrow keys until the desired number shows. Continue
until the time shown in the display is correct, then press
the ENT key. The unit returns to the main menu screen.
To start the timer, highlight the “Dwn Timer Off On”
label. Press the right arrow key to start the timer. Press
the EXIT key to erase the menu. The time you set shows
in the box at the bottom of group L. The timer contin-
ues counting until you stop it. When it reaches zero, an alarm sounds.
Press the EXIT key to stop the alarm.
(Note: When the countdown timer reaches zero, it begins counting
up
until you press the EXIT key. This tells you how long it’s been since the
alarm sounded.)
The up timer has an alarm that can be set to sound at a preset time. (For
example, one hour from now, three hours, etc.) If you turn the up timer’s
alarm on (press the right arrow key when the Up ALM...Off/On label is
highlighted, it sounds an alarm when it reaches the time you entered in
the up timer set menu. Press the EXIT key to shut off the alarm.
You can reset either alarm by pressing the MENU key, then highlighting
either the “Up Timer Reset” or “Dwn Timer Reset” label, then pressing the
right arrow key.
Group M
This is a time screen. An analog clock shows at the
top, followed by a digital clock showing your local time.
UTC time shows at the bottom of this screen. (UTC is
the time at the prime meridian. It used to be called GMT.)