Filter
Top Products
Reference Station GPS1200 79
8. CTRL (F4) to access CONFIGURE Set NET Port.
9. CONFIGURE Set NET Port
<User: Server>
Configure the NET port numbers and access control.
10. CONT (F1) to return to CONFIGURE Remote Interfaces.
11. Is Remote displayed in the column Interface for the selected NET port?
•If yes, continue with step 13.
•If no, continue with step 12.
12. USE (F6) to use the port NET by remote.
13. Press CONT (F1) twice to return to GPS1200 Main Menu.
)
The receiver is ready to accept an incoming call from a remote application.
14. Connect the receiver port NET to a LAN using a suitable network cable.
Step Description