Filter
Top Products
70GPS1200
Reference Station
)
Connect the device to transmit real-time data to port P1, P2 or P3 of the receiver.
Some devices fit into a clip-on-housing that plugs directly into these ports. Other
devices require an interface cable.
)
Unauthorised radio units should not be connected to the GRX1200 Series.
Cable connection Cable connections are identical to other GPS1200 receivers. Additional cables are
available from Leica Geosystems for the specific oscillator and Ethernet ports on the
GRX1200 Pro.
Switch on Hold down the ON/OFF button on the receiver for at least 2 s.
OR
Press PROG on the RX1200, if used.
OR
Send a pulse/data to one of the serial ports. Port P1, P2 and P3 can be config-
ured not to allow receiver switch on upon pulse reception.
Switch off Press the ON/OFF button on the receiver for at least 4 s.
OR
Press PROG and USER simultaneously on the RX1200, if used.
OR
Click on POWER DOWN in the Web Interface Tools menu.