Filter
Top Products
Reference Station GPS1200 69
)
Normally, the data transfer cable GX RX to RS232 is used to connect the GRX1200
Series to a PC. Connect the cable to port P1, P2 or P3 on the receiver and to the
COM port on the PC.
a) Power supply unit 100/240 V AC to
12 V DC
k) CompactFlash card
b) Interface cable l) Radio interface cable
c) DB9 surge arrester with 12 V DC
pass through
m) Radio
d) Meteo/tilt device with interface cable n) Cable to connect radio antenna
e) Receiver GRX1200 Series o) PC for running LEICA GPS Spider
software or the web interface
f) Weather protection radome for
AT504
p) Serial port
g) AT504 q) Data transfer cable for receiver
communication
h) AX1202/AX1202 GG r) Radio antenna
i) TNC to TNC antenna cable s) Radio surge arrester
j) Surge arrester