Filter
Top Products
36GPS1200
Operation
4 Operation
4.1 Equipment Setup
)
The example given is for static operations.
Equipment setup
step-by-step
Step Description
1. Set up the tripod.
2. Mount and level the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
4. Place and lock the carrier in the tribrach.
5. Screw the antenna onto the carrier.
6. Check that the tribrach is still level.
7. Insert the batteries into the receiver.
)
Alternatively or in addition, to power the receiver externally, connect a
GEB171 battery to the port PWR on the receiver.
8. If no internal memory is fitted, insert a CompactFlash card into the
receiver.