Filter
Top Products
42GPS1200
Operation
Format a Compact-
Flash card step-by-
step
Formatting the CompactFlash card before logging data is started is required if a
completely new CompactFlash card is used or if all existing data needs to be
deleted.
Step Description
1. Loosen the screw of the battery compartment A.
2. Open the cover of battery compartment A.
3. The card should be held with the lable for the care instructions towards the
right-hand side of the receiver.
4. Slide the card firmly into the slot until it clicks into position.
5. Close the compartment cover.
6. To remove the card, open the cover of battery compartment A.
7. Press the eject button above the card slot.
8. Pull out the CompactFlash card.
9. Close the compartment cover.
Step Description
1. Select Main Menu: Tools...\Format Memory Device.