Filter
Top Products
18GPS1200
Description of the System
Software upload All instrument software is stored in the System RAM of the receiver. The software
can be uploaded onto the receiver using the following methods:
• Using LGO the software is transferred via the serial interface to the Compact-
Flash card in the receiver, which is then stored to the System RAM.
• By connecting the CompactFlash card directly to the computer either via an
internal card slot housing or an external OMNI drive, the software is trans-
ferred to the card, which is then stored to the System RAM.
Application
programs
A suite of optional survey-specific application programs are
available for the instrument.
Some of these programs are freely available and can be loaded
and are immediately activated. The other programs must be
purchased and are only activated with a licence key.
Customised
application
programs
Custom software specific to user requirements can be developed
using the GeoC++ development kit.
Information on the GeoC++ development environment is avail-
able on request from a Leica Geosystems representative.
RX1200
software
For RX1210 and RX1220T. This software covers display, sound
and communication settings of the RX1210 and RX1220T.
Software type Description