Filter
Top Products
72GPS1200
Reference Station
5.3 Getting Started with the GRX1200 Series
)
Refer to the seperate "GRX1200 Series - Getting Started" manual for more detailed
information.
Ways of operating The GRX1200 Series can either be operated with the RX1200 like the other
GPS1200 receivers or by remote control, with its web interface or a reference station
software.
Operation Description
With RX1200 The receiver can be fully configured. In order to start and stop a
point occupation, an external application software such as
LEICA GPS Spider must send appropriate OWI or LB2
commands through a remote interface port to the receiver.
Available with full functionality
• Job management
• Data management
• Configuration of ports
• Configuration of operation parameters
• Status information