Filter
Top Products
UNCRATI
NG 3
Uncrating
Opening Crate
•
Clear a space about 6 m (20 ft.) square to
give yo
urself plenty of space to work.
•
Place the crate upright on its base.
•
Remove the cardboard cover.
•
Remov
e the handlebar, front wheel, and the
parts box.
CAUTION
When you remove the crate bracket
from the motorcycle, be careful not to
drop any parts and bracket onto the
fuel tank and other components, and
not to scratch the fuel tank by the crate
bracket. This could damage the fuel
tank or components.
•
Unscrew the four bolts to remove the front
brake and clutch master cylinders.
•
Remove the two bracket bolts and the crate
bracket and discard them.
A
.Bolts
B. Bolt
C. Front Master Cylinder
D. Crate Bracket
E. Clutch Master Cylinder
•
Unscrew the two lower bolts, and then re-
move the two upper bolts and crate bracket.
Discard the bolts and bracket.
A. Lower Bolts
B. Upper Bolts
C. Crate Bracket
•
Take out all the bolts and screws and remove
the top and sides of the crate.