Filter
Top Products
PREPARA
TION 41
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
Steering
1 Handlebar clamp bolts 34 3.5 25
2 Steering stem head nut 88 9.0 65
Brake
3 Front master cylinder clamp bolts 8.8 0.90 78 in·lb S
4 Front caliper mounting bolts (Left and Right) 34 3.5 25
5 Front brake bleed valves (Left and Right) 7.8 0.80 69 in·lb
6 Rear master cylinder mounting bolts 25 2.5 18
7 Rear caliper mounting bolts 34 3.5 25
8 Rear brake bleed valves 7.8 0.80 69 in·lb
Wheel
9 Front axle shaft 108 11.0 80
10 Front axle clamp bolts (Right) 29 3.0 21 AL
Suspe
nsion
11
Rear shock absorber mounting nuts (Left and
Right)(Uper and Lower)
34 3.5 25
Other
s
12
Front footboard bracket bolts (Left and Right)
34 3.5 25
13 Rear footboard bracket bolts (Left and Right) 25 2.5 18
14 Clutch master cylinder clamp bolts 11 1.1 97 in·lb
Engine
Engine Oil Drain Plugs:
15 Engi
ne oil drain plug
20 2.0 15
16 Final gear case drain plug 8.8 0.90 78 in·lb
Cotter Pin or Circlip
17 Rear axle nut cotter pin – – –
18 Rear master cylinder cotter pin – – –
19 Front footboard pin circlips (Left and Right) – – –
20 Rear footboard pin circlips (Left and Right) – – –
AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque.
S: Tighten the upper clamp bolt first, and then the lower clamp bolt.