Filter
Top Products
ASSEMBL
Y21
A. Bolts
B. Sub-windshield
License Plate Bracket
License Plate Bracket Installation
•
Install the license plate bracket onto the rear
fender with the bolts (D = 6, L = 12)(2).
A. Rear Fender
B. License Plate Bracket
C. Bolts (D = 6, L = 12)
Rear Reflectors and License Plate
Holder
US and CN M odels only
•
Assemble the rear reflectors, bracket, and li-
cense plate holder with the cap nut (D = 5) on
each.
A. Reflectors
B. Reflector Bracket
C. L
icense Plate Holder
D.CapNuts(D=5)
•
Install the license plate holder and the rear
reflector bracket on the license plate bracket
with the bolts (D = 6, L = 14)(3) and plated
cap nuts (3) and tighten them. The remaining
fasteners are used for the license plate.
A. License Plate Holder
B. Reflector Bracket
C. Bolt (D = 6, L = 14)
D. Cap Nut
E. License Plate Bracket
F. For US Models
G. For CN Models
AUS Models only
•
Install the rear reflector on the license plate
holder with the cap nut (D = 5) and tighten it.