Filter
Top Products
20 ASSEM
BLY
A. Windshield Assembly
B. Socket Bolts (D = 8, L = 10)
Trim Installation [EUR Models Only]
•
Fit the windshield trim onto the edge of the
windshield starting from each lower edge.
•
Fix the trim ends with the clamps (2).
A. Trim
B. Clamps
Deflectors (Left and Right) Installation
•
Assemble the left and right stays, deflectors,
and outer plates with t he socket bolts (D = 6,
L = 16)(4) and cap nuts (D = 6)(4).
A. Stay (Left)
B. Deflector
C. Outer Plate
D. Socket Bolts (D = 6, L = 16)
E. Stay (Right)
F. Cap Nuts
•
Install each deflector on the bracket with the
socket bolts (D = 8, L = 10)(2) for each side
and tighten them.
A. Deflector (Right)
B. Socket Bolts (D = 8, L = 10)
Windshield Height Adjustment
The windshield can be adjusted 50 mm (2 in.)
in height to suit the rider’s preference.
•
Loosen both the upper and lower bolts on
each lower side of the windshield and move
it up or down.
•
Align both the left and right windshield stays.
•
Tighten the bolts securely.
A. Windshield
B. Bolts
C. Positioning Marks
Sub-windshield Adjustment
•
Loosen the windshield bolts on the left and
right vertical outer plates and move the sub
-windshield up or down. The distance should
be 10 mm (0.04 in.) between the lower edge
of the sub-windshield and the headlight body.
•
Tighten the windshield bolts.